Click image to view full size image
Honed Tubes For Hydraulic Cylinders, with standard DIN2391,EN10305-1/2,GB/8713,we manufacture from OD40mm to 800mm and length 14 meter max. Our yearly capacity is 18000 tons.Our products are widely used in Hydraulic cylinder and other mechanical application.
Supply conditions:
Honed or skived roller burnished
Tolerance I.D.:H8
Surface Roughness: Ra 0.2~0.4 micron
Straightness: max 1:1000mm
Certification: EN10204/3.1.B
Protection: inside oiled,ends plastic caps
Packing; packed in bundles by steel strips
Chemical composition %
Grade |
C |
Mn |
Si |
P |
S |
E355 |
Max 0.2 |
Max 1.55 |
Max 0.5 |
Max 0.02 |
Max 0.01 |
Mechanical properties
|
Grade |
Stress |
Min Yield Strength |
Tensile |
Minimum |
|
Relieving |
(Rp 0.2%) Mpa |
Strength |
Elongation |
||
WT≤16mm |
WT＞16mm |
Mpa |
|||
E355 |
SR |
520 |
490 |
Min 600 |
15 |
Specially designed honed tubes, hydraulic honed tubes, honed bore tubes and seamless honed tubes are manufactured and supplied to the industry. We comprehend the requirement of our clients and therefore offer our range of honed tubes, honed bore tubes, honed steel tube and seamless honed tubes. Leveraging on our technical expertise, we are capable of manufacturing honed tubes at par with our industrial counterparts. Our range of honed tubes include:
Hydraulic Honed Tube
To fulfill various industrial requirements, we offer our assortment of honed tubes. Our in-depth industry knowledge and our in-house facilities enable us to fabricate and supply one of the most reckoned arrays of honing tubes. Henceforth, our range of honing tubes has numerous takers in the industry. Some of the features of our honing tubes are: • Abrasion resistant • Versatile sizes • Highly durable.
E-mail: 